- Easy Connectivity/ Simple Utilization
- Isolated Measurement
- Loop Power
- 4-20mA Output
- 5:1 Crest Factor Capability
- ±0.5% Accuracy
- Low Ripple/ 0.2% Typical
- 1.50” Diameter Thru-hole
- Reverse Polarity Protection
- 100m-sec Response (10% to 90%)
- 18 Standard Current Ranges
AC Current (RMS) Transducer 1006X
$241.00
Product Description
Model 1006X AC Current (RMS) Transducer provides an isolated 4-20mAdc output proportional to the AC input current. The transducers are operated in a two wire loop power configuration, with an input current range from 5Aac to 1200Aac and the transducers withstand, without performance degradation or damage, a continuous overload of 500Aac or twice the full-scale input current, whichever is greater, up to 1750Aac.
The 1006X Series delivers high performance accuracy over a temperature range from -40°C to +85°C and measures input current with a frequency range from 47 to 63Hz, with Crest Factors up to 5. A 400Hz model is available. The transducers are low powered (25mA typical current drain @ overload), operate with a supply voltage from +10 to +35Vdc and produces a 4-20mA output into a load resistance from 0 to 1400 Ohms.
The 1006X AC Current (RMS) Transducers are non-intrusive, come standard with a barrier interface, offer a large 1.5” (3.81cm) input thru-hole and are UL and CSA Recognized.
- Lighting Monitoring
- Motor Current Faults
- Conveyor Belt Monitoring
Additional information
| Weight | 12 oz |
|---|---|
| Dimensions | 3 × 3 × 2 in |
| Output | |
| Measurement | |
| Supply Type | |
| Housing | |
| Input Diameter | |
| Supply Voltage | |
| Housing Material | |
| Current Range | 1000A, 100A, 10A, 1200A, 150A, 200A, 20A, 250A, 25A, 300A, 30A, 350A, 400A, 500A, 50A, 5A, 600A, 75A, 800A |
| Interface | |
| Frequency Range | 47 to 63Hz |
| Crest Factors | 5:1 |
- Attitude: Works in any position.
